Trace Line Clock Uses a Single Hand to Sketch Time as a Moving Line - Yanko Design

"The Trace Line Clock is a minimal, 3D-printed desk clock by Hye-jin Park that uses one continuous hand to show both hours and minutes. The inner end of the line rides an inner circle for the hour, while the outer end rides an outer circle for the minute. As time passes, the line's angle and length shift, so every glance shows a new geometric relationship between the two."

"The physical form is a white, wedge-like block that leans back slightly, with a circular recess on the front. Two concentric tracks are cut into that circle, and a single colored line spans between them. There are no numerals, logos, or extra markings, just the circles and the hand. It reads more like a small piece of graphic sculpture than a typical clock, especially on a clean desk."

"The inner tip of the line points to the hour on the inner track, while the outer tip points to the minute on the outer track. It's not as instant as glancing at a bold wall clock, but it's also not inscrutable. With a moment's attention, you can read it reasonably well, and the payoff is that you also get a little geometric drawing that changes every minute instead of just numbers."

The Trace Line Clock uses one continuous hand to indicate hours and minutes by running its inner end on an inner circle and its outer end on an outer circle. The hand's angle and length continuously change as the minute end moves faster than the hour end, producing dynamic stretching, shrinking, and rotation. The object takes the form of a white, wedge-like block with a circular recess and two concentric tracks, lacking numerals or extra markings. Reading the time requires brief attention, and the clock rewards second glances with an evolving geometric sketch instead of static numbers.

Read at Yanko Design - Modern Industrial Design News