"To ensure a combination boiler operates efficiently and effectively, it must be set to the correct boiler pressure. Combi boilers typically have a gauge on the front that runs from one to four bar. You will need to check the gauge to ensure the pressure is set correctly. Patrick Garner, Gas Safe Engineer at Heatable, shares what the ideal pressure should be: "The ideal pressure for a combi boiler is usually between one and one and a half bar when the system is cold.""
"However, this will rise when the heating is in operation: "As the heating comes on, the pressure will naturally rise, often up to around two bar." But Patrick warns that it shouldn't go much higher, "If you're seeing readings of two and a half bar, that's edging towards the limit. Boilers are designed to operate safely up to three bar, but if it's creeping that high regularly, it suggests there's an underlying issue.""
Combi boiler pressure must be correctly set to ensure smooth operation of heating and hot water systems. Most combi boilers have a front gauge reading from one to four bar; the ideal cold pressure is about one to one and a half bar. Pressure typically rises to around two bar when the heating is on. Regular readings near two and a half to three bar indicate potential faults and can strain the system, causing leaks or failure. Pressures under about half a bar usually cause boilers to cut out and often point to leaks in pipework, radiators, or the pressure relief valve.
Read at Homebuilding
Unable to calculate read time
Collection
[
|
...
]