
"The Oppo A6 Pro is official, and it's one tough smartphone. Rated for IP66, IP68, and IP69, it can handle 8,000KPa of hot water pressure, can soak in 1.5 meters of water for half an hour, and can be used with wet or oily hands. Oppo says that the A6 Pro can resist a drop of 2.5 meters, continuous drops from 1.5 meters, and can even last up to 1,830 times if dropped from half a meter."
"But it's not just physical strength - Oppo worked to achieve better signal strength on the A6 Pro by embedding a 36-degree surround antenna into the phone's frame. Dubbed the Shanhai (yeah, that's how they spell it) RF Antenna, it increases low-frequency transmission by 200% and improves reception. And on the software front, the phone will switch to the optimal network if it senses lag."
"The Oppo A6 Pro uses a 4nm MediaTek Dimensity 7300 SoC with 8GB, 12GB, or 16GB of LPDDR4X RAM. There's a 7,000mAh battery with 80W charging. Oppo says the battery will be at 80% strength after 1,830 charging cycles, can charge at -20℃, and can keep fast charging going in between 0℃ and 43℃. There's only one meaningful camera on the back - a 50MP f/1.8 wide-angle. Paired with it is a 2MP depth sensor. Upfront is a 16MP f/2.4 selfie."
Rated IP66, IP68 and IP69, the phone withstands 8,000KPa hot water pressure, 1.5 meters immersion for 30 minutes, and operation with wet or oily hands. The frame uses aviation-grade aluminum and Crystal Shield glass for drop resistance, surviving drops up to 2.5 meters and many repeated impacts. A 36-degree surround Shanhai RF Antenna boosts low-frequency transmission by 200% and enables automatic network switching when lag is detected. The device uses a 4nm MediaTek Dimensity 7300 SoC with up to 16GB LPDDR4X RAM, a 7,000mAh battery with 80W charging and wide temperature charging support. A single 50MP f/1.8 rear camera, 16MP front camera, 6.57-inch 120Hz OLED at 2372x1080 and multiple color and storage configurations complete the package, with pre-orders available and shipping from September 12.
Read at GSMArena.com
Unable to calculate read time
Collection
[
|
...
]