"The internet is full of cleaning hacks for greasy stovetops. When it comes to a glass stovetop, you need something that cuts through grease without being abrasive so it doesn't scratch the surface. One solution you may never have tried before that's worth checking out is WD-40. Most people keep a can of WD-40 on hand to lubricate squeaky hinges or help remove rusty bolts. It's also good for cleaning a sharpening stone in the kitchen. The name stands for Water Displacement 40th formula, and it's a displacement oil. Its original purpose was to act as a degreaser and rust-prevention solvent. Later, it was most often used as a general lubricant. These days, the company markets it as a multi-use product, and cleaning a greasy stove is one of those uses."
"It's important to make sure your stove is turned off and cool to the touch before using WD-40 to clean it. Since WD-40 is flammable, it could cause a serious accident or injury if you use it while the stove is on. Once you're certain it's safe to proceed, give the can a shake. Spray the area to be cleaned with WD-40 and give it time to thoroughly soak into any greasy or crusty spots. Remember, this product was originally designed as a degreaser, so the formula is meant to break down buildup. You don't need to saturate the area to be cleaned, just make sure it's thoroughly covered. You'll need to wait a few minutes for the solvent to work."
"Several features make WD-40 useful as a stove cleaner. The solvent component is able to penetrate deeply into even the smallest areas to dissolve grease, what some call "creeping properties." On a glass stovetop, it can clean the surface as well as reach into scratches, grooves, and seams where grease builds up. After waiting for the solution to work, you can use a paper towel or microfiber cloth to wipe the stovetop clean. Don't use a coarse scrubbing sponge since it can damage the glass."
WD-40 is a displacement oil originally created to act as a degreaser and rust-prevention solvent. It can be used to clean greasy glass stovetops by breaking down buildup without abrasive scrubbing. The stove must be turned off and cool to the touch because WD-40 is flammable. After shaking the can, the surface should be sprayed and allowed to soak for a few minutes so the solvent can penetrate and dissolve grease, including in small grooves, seams, and scratches. The stovetop should then be wiped with a paper towel or microfiber cloth, while avoiding coarse scrubbing sponges that can damage the glass.
Read at Tasting Table
Unable to calculate read time
Collection
[
|
...
]